DỊCH VỤ
Công tắc xoay HL-400GZ Towa Seiden
Liên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
lien.ans@ansvietnam.com
Trực tiếp Zalo: 0902937088
Click->SnapchatVan VPS 34102* HF DN250 NP6 Automatic valve
Towa Seiden Vietnam,Công tắc xoay HL-400GZ Towa Seiden
HL-400GZ Towa Seiden Vietnam
ANS tự hào được sinh ra và mang trong mình sứ mệnh là đáp ứng tất cả các nhu cầu cũng như giúp Quý khách hàng tối ưu hóa các giải pháp khắc phục mọi vấn đề trong ngành công nghiệp điện tử tự động một cách hiệu quả nhất.
Chuyên nghiệp về kỹ thuật, chăm sóc khách hàng và sự hỗ trợ nhiệt tình từ các nhà sản xuất, chúng tôi luôn tự tin đáp ứng mọi yêu cầu của quý khách hàng .
Với khuynh hướng tiến cùng thời đại, phương châm của ANS chúng tôi là giúp quý khách hàng tiếp cận các thiết bị kỹ thuật hiện đại với cách sử dụng rất đơn giản, an toàn và nhanh nhất.
“Hành động kịp thời – Đáp ứng nhanh chóng – Dẫn đầu tự động – Đi đầu cải tiến”
Thêm vào đó, đội ngũ vận chuyển hàng hóa trên toàn cầu – hàng hóa nhập khẩu hàng tuần, đảm bảo thời gian, tiết kiệm chi phí, đến với ANS, bạn (quý khách)sẽ nhận được sự phục vụ tốt nhất.
Xem thêm: Các thương hiệu nổi tiếng trên thế giới mà công ty chúng tôi phân phối
SẢN PHẨM
Rotary Paddle Type Level Switch
Rotary Paddle Type Level Switch
HL-400 Compact Type
Loại nhỏ dành riêng cho nguyên liệu dạng bột và dạng hạt. Vì phần tiếp xúc với bột là đặc điểm kỹ thuật của SUS, nó là lý tưởng cho các loại rầy cho thực phẩm. Kiểm soát mức độ các bể nhỏ và các phễu nhỏ trong nhà máy sản xuất nguyên liệu.
Kiểm soát mức độ của thiết bị (máy trộn / máy sấy / silo nguyên liệu, v.v.) cung cấp nguyên liệu cho máy ép phun và máy ép đùn.
Khi mua riêng một công tắc cấp
Kích thước kết nối: G3 / 4 ”
Kích thước cánh khuấy (mm): W-35 × 80
HL-400S-G3/4-110V-L-85
HL-400S-G3/4-110V-L-100
HL-400S-G3/4-110V-L-135
HL-400S-G3/4-220V-L-85
HL-400S-G3/4-220V-L-100
HL-400S-G3/4-220V-L-135
HL-400-AC100V-L-85
HL-400-AC200V-L-85
HL-400-AC100V-L-100
HL-400-AC200V-L-100
HL-400-AC100V-L-135
HL-400-AC200V-L-135
HL-400G-200/220V-L-300
Tham khảo list code sản phẩm nổi bật TOWASIDEN!!!!!
| Encoders & Traction Wheels Shaft Speed Pulse Generators | |||||
| Model | Notes | Part Number | |||
| 380 Series Rotary Shaft Encoder | |||||
| Specify operating voltage, PPR, and single channel or quadrature output when ordering encoders. | |||||
| Standard output (1-600 PPR) | |||||
| Standard output (601-1,270 PPR) | |||||
| Quadrature output (1-600 PPR) | |||||
| Quadrature output (601-1,270 PPR) | |||||
| Explosionproof housing | |||||
| Optional IP 65 Gasket Shaft Seal | |||||
| 470 Series Heavy-Duty Rotary Shaft Encoder | |||||
| Specify operating voltage, PPR, and single channel or quadrature output when ordering encoders. | |||||
| Quadrature output (1-1,270 PPR) | |||||
| Quadrature output (1,271-3,000 PPR) | |||||
| Quadrature output (3,001-5,000 PPR) | |||||
| Quadrature output (5,001-6,000 PPR) | |||||
| HV 5-28 VDC line driver output | |||||
| Traction Wheel Encoder Assemblies – includes mounting hinge and arm and wheel. | |||||
| To complete the Traction Wheel Kit, add a single channel or quadrature model 380 encoder and mating connector. | |||||
| TRACTION WHEEL KIT BLACK NEOP | 976-001100 | ||||
| TRACTION WHEEL KIT TAN POLY | 976-001200 | ||||
| TRACTION WHEEL KIT K-ALUM | 976-001300 | ||||
| Encoders & Traction Wheels Shaft Speed Pulse Generators | |||||
| Magnet Wheels Shaft Speed Pulse Generators | |||||
| Model | Notes | Part Number | |||
| MAGNET WHEEL END MOUNT 60PPR AL.196 BORE | 0.196 bore, Stock item | 700-002400 | |||
| Standard shaft mount wheels | |||||
| MAGNET WHEEL .375 60PPMW | 3/8 inch bore, Stock item | 700-210375 | |||
| MAGNET WHEEL .500 60PPMW | 1/2 inch bore, Stock item | 700-210500 | |||
| MAGNET WHEEL .625 60PPRMW | 5/8 inch bore, Stock item | 700-210625 | |||
| MAGNET WHEEL .750 60PPMW | 3/4 inch bore, Stock item | 700-210750 | |||
| MAGNET WHEEL .875 60PPMW | 7/8 inch bore, Stock item | 700-210875 | |||
| MAGNET WHEEL 1.00 60PPMW | 1 inch bore, Stock item | 700-211000 | |||
| MAGNET WHEEL 1.125 60PPMW | 1-1/8 inch bore, Stock item | 700-211125 | |||
| MAGNET WHEEL 1.250 60PPMW | 1-1/4 inch bore, Stock item | 700-211250 | |||
| MAGNET WHEEL 1.375 60PPMW | 1-3/8 inch bore, Stock item | 700-211375 | |||
| MAGNET WHEEL 1.4375 60PPMW | 1-7/16 inch bore, Stock item | 700-211437 | |||
| MAGNET WHEEL 1.500 60PPMW | 1-1/2 inch bore, Stock item | 700-211500 | |||
| MAGNET WHEEL 1.625 60PPMW | 1-5/8 inch bore, Stock item | 700-211625 | |||
| MAGNET WHEEL 1.875 60PPMW | 1-7/8 inch bore, Stock item | 700-211875 | |||
| Magnet Wheels Shaft Speed Pulse Generators | |||||
| Pulser Discs Shaft Speed Pulse Generators | |||||
| Model | Notes | Part Number | |||
| 2.5 – 2.75″ Discs | |||||
| 256 PVC 8 MAG 1/2 2.50x.25x.196 STD | 700-000300 | ||||
| 256A AL 8 MAG 1/2 2.50x.25x.196 STD | 700-001600 | ||||
| 4.0 – 4.75″ Discs | |||||
| 255 NYLON 16 MAG 4.00x.25x.196 STD | 700-000200 | ||||
| 255 SS 16 MAG 1/2 4.00x.25x.196 | 700-000203 | ||||
| 255 PVC 16 MAG 1/2 4.00x.25x.196 | 700-000204 | ||||
| 258 PVC 8 MAG 1/2 4.00x.25x.196 STD | 700-000209 | ||||
| 258A AL 8 MAG 1/2 4.00x.25x.196 | 700-000212 | ||||
| 258 SS 8 MAG 1/2 4.00x.25x.196 | 700-000213 | ||||
| 232 PVC 32 MAG 1/4 4.00x.25x.196 STD | 700-001400 | ||||
| 232 AL 32 MAG 1/4 4.00x.25x.196 STD | 700-001401 | ||||
| 232 SS 32 MAG 1/4 4.00x.25x.196 | 700-001402 | ||||
| 255A AL 16 MAG 1/2 4.00x.25x.196 STD | 700-001500 | ||||
| PDE450 PVC 20 MAG 1/2 4.00x.625x.196 ES | 700-002600 | ||||
| PDE 450 SS 20 MAG 1/2 4.00X.625X.196 | 700-002603 | ||||
| PDE 450A AL 20 MAG 1/2 4.00x.625x.196 | 700-002610 | ||||
| PD455 PVC 20 MAG 1/2 4.75x.25x.196 | 700-002500 | ||||
| PD455 AL 20 MAG 1/2 4.75x.25x.196 | 700-002501 | ||||
| 7.5 – 8.0″ Discs | |||||
| PD725 AL 60 MAG 1/4 7.50x.25x.196 | 700-002800 | ||||
| 257A AL 32 MAG 1/2 8.00x.25x.196 STD | 700-002100 | ||||
| 257 PVC 32 MAG 1/2 8.00x.25x.196 STD | 700-002101 | ||||
| 11.0 – 12.0″ Discs | |||||
| Other Specials | |||||
| Pulser Discs Shaft Speed Pulse Generators | |||||
| Split Collar Pulser Wraps Shaft Speed Pulse Generators | |||||
|
|||||
| Model | Notes | Part Number | |||
| Standard Width Wraps | Size ≤ (Round up to whole number for pricing) | ||||
| For shaft speeds up to 3,000 RPM. | 1 inch PVC | ||||
| O.D. = I.D. + 3″ | 2 inches PVC | ||||
| 4″ Minimum O.D. | 3 inches PVC | ||||
| Width of Wrap = 1.5″ | 4 inches PVC | ||||
| 16 Magnets Standard | 5 inches PVC | ||||
| 6 inches PVC | |||||
| Add $50 for keyway | 7 inches PVC | ||||
| Add $2 per magnet or slug over 16 | 8 inches PVC | ||||
| 9 inches PVC | |||||
| 10 inches PVC | |||||
| Consult factory for all other configurations, | 11 inches PVC | ||||
| materials and size. | 12 inches PVC | ||||
| 13 inches PVC | |||||
| 14 inches PVC | |||||
| 15 inches PVC | |||||
| 16 inches PVC | |||||
| 17 inches PVC | |||||
| 18 inches PVC | |||||
| 19 inches PVC | |||||
| 20 inches PVC | |||||
| Size ≤ (Round up to whole number for pricing) | |||||
| 1 inch ALUMINUM | |||||
| 2 inches ALUMINUM | |||||
| 3 inches ALUMINUM | |||||
| 4 inches ALUMINUM | |||||
| 5 inches ALUMINUM | |||||
| 6 inches ALUMINUM | |||||
| 7 inches ALUMINUM | |||||
| 8 inches ALUMINUM | |||||
| 9 inches ALUMINUM | |||||
| 10 inches ALUMINUM | |||||
| 11 inches ALUMINUM | |||||
| 12 inches ALUMINUM | |||||
| 13 inches ALUMINUM | |||||
| 14 inches ALUMINUM | |||||
| 15 inches ALUMINUM | |||||
| 16 inches ALUMINUM | |||||
| 17 inches ALUMINUM | |||||
| 18 inches ALUMINUM | |||||
| 19 inches ALUMINUM | |||||
| 20 inches ALUMINUM | |||||
|
|||||
| Miniature Wraps | Size ≤ (Round up to whole number for pricing) | ||||
| For shaft speeds up to 3,000 RPM. | 1 inch PVC | ||||
| O.D. = I.D. + 1″ | 2 inches PVC | ||||
| 4″ Minimum O.D. | 3 inches PVC | ||||
| Width of Wrap = 1.25″ | 4 inches PVC | ||||
| 16 Magnets Standard | 5 inches PVC | ||||
| 6 inches PVC | |||||
| Add $50 for keyway | 7 inches PVC | ||||
| Add $2 per magnet or slug over 16 | 8 inches PVC | ||||
| 9 inches PVC | |||||
| Size ≤ (Round up to whole number for pricing) | |||||
| Consult factory for all other configurations, | 1 inch ALUMINUM | ||||
| materials and size. | 2 inches ALUMINUM | ||||
| 3 inches ALUMINUM | |||||
| 4 inches ALUMINUM | |||||
| 5 inches ALUMINUM | |||||
| 6 inches ALUMINUM | |||||
| 7 inches ALUMINUM | |||||
| 8 inches ALUMINUM | |||||
| 9 inches ALUMINUM | |||||
| Narrow Width Wraps | Size ≤ (Round up to whole number for pricing) | ||||
| For shaft speeds up to 3,000 RPM. | 1 inch PVC | ||||
| O.D. = I.D. + 3″ | 2 inches PVC | ||||
| 7″ Minimum O.D. | 3 inches PVC | ||||
| Width of Wrap = 0.625″ | 4 inches PVC | ||||
| 16 Magnets Standard | 5 inches PVC | ||||
| 6 inches PVC | |||||
| Add $50 for keyway | 7 inches PVC | ||||
| Add $2 per magnet or slug over 16 | 8 inches PVC | ||||
| 9 inches PVC | |||||
| Size ≤ (Round up to whole number for pricing) | |||||
| Consult factory for all other configurations, | 1 inch ALUMINUM | ||||
| materials and size. | 2 inches ALUMINUM | ||||
| 3 inches ALUMINUM | |||||
| 4 inches ALUMINUM | |||||
| 5 inches ALUMINUM | |||||
| 6 inches ALUMINUM | |||||
| 7 inches ALUMINUM | |||||
| 8 inches ALUMINUM | |||||
| 9 inches ALUMINUM | |||||
|
|
|||||
| High Speed Aluminum Wraps | Size ≤ (Round up to whole number for pricing) | ||||
| For shaft speeds up to 10,000 RPM. | 1 inch ALUMINUM | ||||
| O.D. = I.D. + 1″ | 2 inches ALUMINUM | ||||
| 2″ Minimum O.D. | 3 inches ALUMINUM | ||||
| Width of Wrap = 1.5″ | 4 inches ALUMINUM | ||||
| 2 Magnets Standard | 5 inches ALUMINUM | ||||
| Note: O.D. will increase if keyway is specified | 6 inches ALUMINUM | ||||
| 7 inches ALUMINUM | |||||
| Add $50 for keyway | 8 inches ALUMINUM | ||||
| Add $2 per magnet or slug over 16 | 9 inches ALUMINUM | ||||
| Slotted Magnet Wraps | Size ≤ (Round up to whole number for pricing) | ||||
| For shaft speeds up to 3,000 RPM. | 1 inch PVC | ||||
| O.D. = I.D. + 3″ | 2 inches PVC | ||||
| 7″ Minimum O.D. | 3 inches PVC | ||||
| Width of Wrap = 1.5″ | 4 inches PVC | ||||
| 16 Magnets Standard | 5 inches PVC | ||||
| 6 inches PVC | |||||
| Add $50 for keyway | 7 inches PVC | ||||
| Add $2 per magnet or slug over 16 | 8 inches PVC | ||||
| Add $60 for dovetail magnets | 9 inches PVC | ||||
| Size ≤ (Round up to whole number for pricing) | |||||
| Consult factory for all other configurations, | 1 inch ALUMINUM | ||||
| materials and size. | 2 inches ALUMINUM | ||||
| 3 inches ALUMINUM | |||||
| 4 inches ALUMINUM | |||||
| 5 inches ALUMINUM | |||||
| 6 inches ALUMINUM | |||||
| 7 inches ALUMINUM | |||||
| 8 inches ALUMINUM | |||||
| 9 inches ALUMINUM | |||||
|
|
|||||
| Stainless Steel & All other specials | |||||
| Split Collar Pulser Wraps Shaft Speed Pulse Generators | |||||
| TT420 Temperature Sensors | |||||
| Model | Notes | Part Number | |||
| TT420 | |||||
| TT420F | Probe only | 800-001510 | |||
| TT420S | Probe only | 800-001520 | |||
| TT420Z 2″ | Probe only | 800-001543 | |||
| TT420Z 4″ | Probe Only | 800-001503 | |||
| TT420Z 4″ WITH 1/4″ NPTF ZERK FITTING | Probe + grease adapter | 800-001505 | |||
| TT420Z 4″ WITH 1/8′ NPTF ZERK FITTING | Probe + grease adapter | 800-001504 | |||
| TT420Z 6″ | 800-001500 | ||||
| TT420Z 6″ WITH 1/4″ NPTF ZERK FITTING | Probe + grease adapter | 800-001502 | |||
| TT420Z 6″ WITH 1/8″ NPTF ZERK FITTING | Probe + grease adapter | 800-001501 | |||
| TT420Z 8″ | 800-001530 | ||||
| TT420Z 8″ WITH 1/8″ NPTF ZERK FITTING | Probe + grease adapter | 800-001545 | |||
| TT420Z 12″ | 800-001519 | ||||
| TT420-LT (Half Inch) | |||||
| TT420Z-LT (1/2 in, 10 ft, 4in) | 800-001514 | ||||
| TT420Z-LT (1/2 in, 10 ft, 6in) | 800-001516 | ||||
| TT420Z-LT (1/2 in, 10 ft, 8 in) | 800-001570 | ||||
| TT420Z-LT (1/2 in, 10 ft, 10 in) | 800-001571 | ||||
| TT420Z-LT 12″ PROBE 1/2″ CONDUIT | 800-001528 | ||||
| TT420S-LT (1/2 in, 10 ft, R-Angle) | 800-001527 | ||||
| TT420S-LT (1/2 in, 10 ft, Straight) | 800-001524 | ||||
| Accessories & Spare Parts | Notes | Part Number | |||
| LUG MOUNT ADAPTER FOR TT420S-LT | 776-001300 | ||||
| MAGNET MOUNT FOR TT420S 3/8-16 | 776-001400 | ||||
| TT420 Temperature Sensors | |||||
| Rub Block Door Assemblies Belt Alignment | |||||
| Model | Notes | Part Number | |||
| STANDARD | |||||
| RUB BLOCK DOOR ASSY | STANDARD ASSEMBLY | 800-002800 | |||
| ADJUSTABLE | |||||
| SLIDING RUB BLOCK DOOR ASSEMBLY | ADJUSTABLE ASSEMBLY | 800-003000 | |||
| UNISTRUT | |||||
| RUB BLOCK PLATE ASSY (UNISTRUT) | UNISTRUT ASSEMBLY | 776-001200 | |||
| Rub Blocks Belt Alignment | |||||
| Buyout Product | |||||
| BA100 Belt Alignment | |||||
| Model | Notes | Part Number | |||
| BA100-1 BELT ALIGNMENT SWITCH | 800-002000 | ||||
| BA100-1X BELT ALIGNMENT SWITCH | 800-002200 | ||||
| BA100-2 BELT ALIGNMENT SWITCH | 800-002100 | ||||
| BA100-2X BELT ALIGNMENT SWITCH | 800-002300 | ||||
| BA100-2 BELT ALIGNMENT SWITCH EPOXY COAT | 800-002101 | ||||
| BA100 Belt Alignment | |||||
| HAZARD MONITORS Hazard Monitors | |||||
| Model | Notes | Part Number | |||
| ELECTRO-SENTRY COMMAND CENTER | |||||
| ELECTRO-SENTRY 1 | 800-200000 | ||||
| ELECTRO-SENTRY 16 | 800-200010 | ||||
| HAZARD MONITORS Hazard Monitors | |||||
| Buyout Product | |||||
| AC-D-4M Tachometers, Counters & Displays | |||||
| Model | Notes | Part Number | |||
| ACD4M 4 DIGIT LG DISPLAY CTR | 100-540000 | ||||
| AC-D-4M Tachometers, Counters & Displays | |||||
| AP1000 Tachometers, Counters & Displays | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| AP1000 STD 115VAC | 800-082000 | ||||
| AP1000 STD 230VAC | 800-082001 | ||||
| AP1000 STD 12V | 800-082002 | ||||
| AP1000 STD 24V | 800-082003 | ||||
| AP1000 12VDC HIGH INTENSITY DISPLAY | 800-082004 | ||||
| Accessories & Spare Parts | Notes | Part Number | |||
| ENCLOSURE NEMA 4X 10X8X6 FG W/SWING OUT | AP1000 | 725-003700 | |||
| AP1000 Tachometers, Counters & Displays | |||||
| CT6000 Tachometers, Counters & Displays | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| 115 VAC | |||||
| CT6000 115 VAC | 800-074000 | ||||
| CT6000 4-20 115VAC | 800-074400 | ||||
| CT6000 0-10 115VAC | 800-074501 | ||||
| CT6000 RELAY 115VAC | 800-074200 | ||||
| CT6000 RELAY 4-20 115VAC | 800-074600 | ||||
| CT6000 RELAY 0-10 115VAC | 800-074701 | ||||
| 230 VAC | |||||
| CT6000 230VAC | 800-074100 | ||||
| CT6000 4-20 230VAC | 800-074500 | ||||
| CT6000 0-10 230VAC | 800-074502 | ||||
| CT6000 RELAY 230VAC | 800-074300 | ||||
| CT6000 RELAY 4-20 230VAC | 800-074700 | ||||
| CT6000 RELAY 0-10 230VAC | 800-074702 | ||||
| 10-30 VDC | |||||
| CT6000 10-30VDC | 800-074101 | ||||
| CT6000 4-20 10-30VDC | 800-074503 | ||||
| CT6000 0-10 10-30VDC | 800-074504 | ||||
| CT6000 RELAY 10-30VDC | 800-074301 | ||||
| CT6000 RELAY 4-20 10-30VDC | 800-074703 | ||||
| CT6000 RELAY 0-10 10-30VDC | 800-074704 | ||||
| CT6000 Tachometers, Counters & Displays | |||||
| Buyout Product | |||||
| HH100 Tachometers, Counters & Displays | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| HH100 HAND HELD TACHOMETER | 976-000900 | ||||
| REFLECTIVE TABS | HH-100 (qty 35) | 972-006000 | |||
| HH100 Tachometers, Counters & Displays | |||||
| TR400 Tachometers, Counters & Displays | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| 115 VAC | |||||
| TR400 115VAC | 800-078701 | ||||
| TR400 4-20 115VAC | 800-078703 | ||||
| TR400 0-10 115VAC | 800-078713 | ||||
| TR400 RELAY 115VAC | 800-078705 | ||||
| TR400 RELAY 4-20 115VAC | 800-078707 | ||||
| TR400 RELAY 0-10 115VAC | 800-078717 | ||||
| TR400 6 RELAY WITH ANALOG 115VAC | 800-078800 | ||||
| 230 VAC | |||||
| TR400 230VAC | 800-078702 | ||||
| TR400 4-20 230VAC | 800-078704 | ||||
| TR400 0-10 230VAC | 800-078714 | ||||
| TR400 RELAY 230VAC | 800-078706 | ||||
| TR400 RELAY 4-20 230VAC | 800-078708 | ||||
| TR400 RELAY 0-10 230VAC | 800-078718 | ||||
| TR400 6 RELAY WITH ANALOG 230VAC | 800-078801 | ||||
| 10-30 VDC | |||||
| TR400 10-30 VDC | 800-078719 | ||||
| TR400 4-20 10-30 VDC | 800-078720 | ||||
| TR400 0-10 10-30 VDC | 800-078723 | ||||
| TR400 RELAY 10-30 VDC | 800-078721 | ||||
| TR400 RELAY 4-20 10-30 VDC | 800-078722 | ||||
| TR400 RELAY 0-10 10-30 VDC | 800-078724 | ||||
| TR400 6 RELAY WITH ANALOG 10-30VDC | 800-078802 | ||||
| TR400 QR 2 RELAY 10-30VDC | 800-078804 | ||||
| TR400 QR 6 RELAY 10-30VDC | 800-078803 | ||||
| TR400C | |||||
| TR400C RELAY 115VAC | 800-078709 | ||||
| TR400C RELAY 4-20 115 VAC | 800-078710 | ||||
| TR400C RELAY 230 VAC | 800-078711 | ||||
| TR400 SGA | |||||
| TR400SGA 115VAC CONV | 800-079000 | ||||
| TR400SGA 230VAC CONV | 800-079001 | ||||
| TR400SGA 10-30VDC CONV | 800-079002 | ||||
| TR400 Tachometers, Counters & Displays | |||||
| TR5000 Tachometers, Counters & Displays | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| 115 VAC | |||||
| TR5000 115 VAC | 800-072000 | ||||
| TR5000 4-20 115VAC | 800-072400 | ||||
| TR5000 0-10 115VAC | 800-072501 | ||||
| TR5000 RELAY 115VAC | 800-072200 | ||||
| TR5000 RELAY 4-20 115VAC | 800-072600 | ||||
| TR5000 RELAY 0-10 115VAC | 800-072701 | ||||
| 230 VAC | |||||
| TR5000 230 VAC | 800-072100 | ||||
| TR5000 4-20 230VAC | 800-072500 | ||||
| TR5000 0-10 230VAC | 800-072502 | ||||
| TR5000 RELAY 230VAC | 800-072300 | ||||
| TR5000 RELAY 4-20 230VAC | 800-072700 | ||||
| TR5000 RELAY 0-10 230VAC | 800-072702 | ||||
| 10-30 VDC | |||||
| TR5000 10-30 VDC | 800-072102 | ||||
| TR5000 4-20 10-30 VDC | 800-072503 | ||||
| TR5000 0-10 10-30 VDC | 800-072504 | ||||
| TR5000 RELAY 10-30 VDC | 800-072302 | ||||
| TR5000 RELAY 4-20 10-30 VDC | 800-072703 | ||||
| TR5000 RELAY 0-10 10-30 VDC | 800-072704 | ||||
| TR5000 Tachometers, Counters & Displays | |||||
| SG1000 Slide Gate & Angle Position | |||||
| Model | Notes | Part Number | |||
| SG1000A SLIDEGATE MONITOR FINAL ASSY | 800-010000 | ||||
| SG1000B SLIDEGATE MONITOR FINAL ASSY | 800-010100 | ||||
| SG1000C SINGLE-TURN MONITOR FINAL ASSY | 800-010200 | ||||
| SG1000D DAMPER-VALVE MONITOR FINAL ASSY | 800-010300 | ||||
| SG1000E SUBTURN SHAFT MONITOR FINAL ASSY | 800-010400 | ||||
| TR400SGA 115VAC CONV | 800-079000 | ||||
| TR400SGA 230VAC CONV | 800-079001 | ||||
| TR400SGA 10-30VDC CONV | 800-079002 | ||||
| HARDWARE STABILIZER BRACKET SG1000 | Included with new SG1000A/C/D/E/F | 300-100002 | |||
| HARDWARE MOUNTING PKG FOR SG1000B CLAMP | Attaches with clamps | 300-100000 | |||
| OR | |||||
| HARDWARE MOUNTING PKG FOR SG1000B BOLT | Attaches with bolts | 300-100003 | |||
| And | |||||
| HARDWARE MTNG PKG FOR TELESCOPIC ARM | 300-100001 | ||||
| TELESCOPIC ARM 10″ FINAL ASSY | 800-010110 | ||||
| TELESCOPIC ARM 16″ FINAL ASSY | 800-010116 | ||||
| TELESCOPIC ARM 18″ FINAL ASSY | 800-010118 | ||||
| TELESCOPIC ARM 20″ FINAL ASSY | 800-010120 | ||||
| SG1000 Slide Gate & Angle Position | |||||
| AIFO-200 Signal Conditioners & Interface | |||||
| Model | Notes | Part Number | |||
| AIFO-200 115VAC | 803-000700 | ||||
| AIFO-200 230VAC | 803-000701 | ||||
| AIFO-200 Signal Conditioners & Interface | |||||
| ION Signal Conditioners & Interface | |||||
| Model | Notes | Part Number | |||
| ION ANALOG IN MODBUS RTU NODE | 800-011000 | ||||
| ION DISCRETE I/O MODBUS RTU NODE | 800-011100 | ||||
| ION FREQUENCY/DISCRETE-IN NODE | 800-011200 | ||||
| ION Signal Conditioners & Interface | |||||
| SA420 Signal Conditioners & Interface | |||||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| SA420 115VAC | 800-084000 | ||||
| SA420 230VAC | 800-084001 | ||||
| SA420 +12V | 800-084002 | ||||
| SA420 +24V | 800-084003 | ||||
| OBS SA420 FINGERSAFE 115VAC | 800-084100 | ||||
| OBS SA420 FINGERSAFE 230VAC | 800-084101 | ||||
| OBS SA420 FINGERSAFE +12V | 800-084102 | ||||
| OBS SA420 FINGERSAFE +24V | 800-084103 | ||||
| NEMA 4X | |||||
| ENCLOSURE KIT LRB 8X6X6 NEMA 12 | AP1000, LRB1000/2000, SA420, SS110 | 725-000004 | |||
| ENCLOSURE KIT LRB 10X8X6 NEMA 4 | LRB1000/2000, SA420, SS110 | 725-000005 | |||
| ENCLOSURE KIT LRB 10X8X6 NEMA 4X | LRB1000/2000, SA420, SS110 | 725-000006 | |||
| SA420 Signal Conditioners & Interface | |||||
| MTS Series & SCU-200 Vibration & Tilt | |||||
| Model | Notes | Part Number | |||
| Probe (requires Control Unit to complete a system) | |||||
| MTS200 STD TILT SWITCH | 775-003600 | ||||
| MTS20H STD TILT SW W/HANGER | 775-003800 | ||||
| MTSS20H SS TILT SW W/HANGER | 775-003700 | ||||
| MTS300 HD TILT SWITCH | 775-002000 | ||||
| MTS30H HD TILT SW W/HANGER | 775-003900 | ||||
| MTSS300 HD SS TILT SWITCH | 775-002100 | ||||
| MTSS30H HD SS TILT SWITCH W/HANGER | 775-003500 | ||||
| Control Units | |||||
| SCU200 NEMA 4 115VAC | 800-006001 | ||||
| SCU200 NEMA 12 115VAC | 800-006000 | ||||
| SCU200 115 VAC STAINLESS STEEL | 800-006005 | ||||
| SCU200 NEMA 4 115VAC INTRINSICALLY SAFE | 800-006004 | ||||
| SCU200 NEMA4 230VAC | 800-006003 | ||||
| SCU200 NEMA12 230VAC | 800-006002 | ||||
| MTS Series & SCU-200 Vibration & Tilt | |||||
| VS Series Vibration & Tilt | |||||
| Model | Notes | Part Number | |||
| VS1 NPN OUTPUT (NEMA 4X) | 800-096001 | ||||
| VS1 RELAY OUTPUT (NEMA 4X) | 800-096000 | ||||
| VS2 NPN OUTPUT (NEMA 4X) | 800-096011 | ||||
| VS2 RELAY OUTPUT (NEMA 4X) | 800-096010 | ||||
| VS1 RELAY OUTPUT NO LABEL (NEMA 4X) | 800-096002 | ||||
| VS2 RELAY OUTPUT NO LABEL (NEMA 4X) | 800-096012 | ||||
| VS1 FINAL ASSY NPN OUTPUT (XP BLANK) | 800-096101 | ||||
| VS1 FINAL ASSY RELAY OUTPUT (XP BLANK) | 800-096100 | ||||
| VS2 FINAL ASSY NPN OUTPUT (XP BLANK) | 800-096111 | ||||
| VS2 FINAL ASSY RELAY OUTPUT (XP BLANK) | 800-096110 | ||||
| VS1 FINAL ASSY NPN OUTPUT (XP WINDOW) | 800-096121 | ||||
| VS1 FINAL ASSY RELAY OUTPUT (XP WINDOW) | 800-096120 | ||||
| VS2 FINAL ASSY NPN OUTPUT (XP WINDOW) | 800-096131 | ||||
| VS2 FINAL ASSY RELAY OUTPUT (XP WINDOW) | 800-096130 | ||||
| VS Series Vibration & Tilt | |||||
| VUM Series Vibration & Tilt | |||||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| Probe (requires Control Unit to complete a system) | |||||
| VUM800 PROBE | 775-080000 | ||||
| VIBRATION MONITOR 25′ | VUM800 probe with 25 foot cable | 775-080001 | |||
| VUM800 PROBE W/STRAIN RELIEF | 775-080002 | ||||
| Control Units | |||||
| VUM800 CONTROLLER INTERNAL 115VAC | 750-038900 | ||||
| VUM800 115VAC w/NEMA 12 ENCLOSURE | 800-008900 | ||||
| VUM800 230VAC w/NEMA 12 ENCLOSURE | 800-008901 | ||||
| VUM Series Vibration & Tilt | |||||
| Accu Series Motor Drive Control | |||||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| ACCU-DIAL FINAL ASSY | 800-044900 | ||||
| ACCU-DIAL TESCOM FINAL ASSEMBLY | 800-044901 | ||||
| ACCU-DIAL W/ANALOG INPUTS FINAL ASSY | 800-044903 | ||||
| ACCUDIAL W/ANA INPUTS CONQUIP FINAL ASSY | 800-044904 | ||||
| ACCU-TACH FINAL ASSY | 800-044910 | ||||
| Accu Series Motor Drive Control | |||||
| MS / ML Series Motor Drive Control | |||||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | |||||
| Model | Notes | Part Number | |||
| MS196 | |||||
| M196 MICRO SPEED STD 115VAC | 800-006900 | ||||
| M196 MICRO SPEED STD 230V | 800-006901 | ||||
| MS320 | |||||
| MS320 0-10 115 VAC | 800-070701 | ||||
| MS320 W/OPTION 0-10 115VAC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070705 | |||
| MS320 4-20 115 VAC | 800-070703 | ||||
| MS320 W/OPTION 4-20 115VAC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070707 | |||
| MS320 0-10 230VAC | 800-070702 | ||||
| MS320 W/OPTION 0-10 230VAC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070706 | |||
| MS320 4-20 230VAC | 800-070704 | ||||
| MS320 W/ OPTION 4-20 230VAC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070708 | |||
| MS320 0-10 10-30 VDC | 800-070709 | ||||
| MS320 W/OPTION 0-10 10-30 VDC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070711 | |||
| MS320 4-20 10-30 VDC | 800-070710 | ||||
| MS320 W/ OPTION 4-20 10-30 VDC | 2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422 | 800-070712 | |||
| MS332 | |||||
| MS332 SYNCHRONOUS CONTROLLER | 952-000000 | ||||
| MS332 STANDARD 230VAC | 952-000002 | ||||
| Microspeed / Microlength Series Motor Drive Control | |||||
| Disc Guards Accessories | |||||
| Model | Notes | Part Number | |||
| DISCGUARD STANDARD M/907/SCP | 907 XP, M, SCP, FB420, ASiSA, SpeedTalker DN-XP | 725-005300 | |||
| DISCGUARD EZ-MOUNT XP | 907 XP, M, SCP, FB420, ASiSA, SpeedTalker DN-XP | 725-005200 | |||
| DISCGUARD LOWER EZ-MOUNT | For use with 725-005200 | 725-005201 | |||
| DISCGUARD EZ-SCP | 725-005600 | ||||
| DISCGUARD 931/933 | Mini XP | 725-005400 | |||
| DISCGUARD 8″ | Large, for discs over 4 inches | 725-005500 | |||
| Disc Guards Accessories | |||||
| Enclosures Accessories | |||||
| Model | Notes | Part Number | |||
| Explosion Proof | |||||
| HOUSING XP XJMGCH TR400 CT6000 | TR400, TR5000, CT6000, MS332, MS320 | 305-001400 | |||
| HOUSING XP XJMAGCH N4 AP1000 | AP1000, LRB1000/2000, SA420, SS110 WINDOW | 305-001600 | |||
| HOUSING XJMAGC MOD SOCKT 1.299 SA,LRB,SS | LRB1000/2000, SA420, SS110 NO WINDOW | 305-001601 | |||
| NEMA 4X | |||||
| ENCLOSURE KIT LRB 8X6X6 NEMA 12 | AP1000, LRB1000/2000, SA420, SS110 | 725-000004 | |||
| ENCLOSURE KIT LRB 10X8X6 NEMA 4 | AP1000, LRB1000/2000, SA420, SS110 | 725-000005 | |||
| ENCLOSURE KIT LRB 10X8X6 NEMA 4X | LRB1000/2000, SA420, SS110 | 725-000006 | |||
| ENCLOSURE NEMA 4X 14X12X8 FG W/SWING OUT | TR400, TR5000, CT6000, MS332, MS320 | 725-003600 | |||
| ENCLOSURE NEMA 4X 10X8X6 FG W/SWING OUT | AP1000 | 725-003700 | |||
| Enclosures Accessories | |||||
| EZ Mounting Brackets Accessories | |||||
| Model | Notes | Part Number | |||
| EZ-100 SHAFT MNT W/ UBLT AND 255EZ | 810-000001 | ||||
| EZ-SCP BRACKET ASSEMBLY W/ 255EZ | 810-000005 | ||||
| EZ-100 SHAFT MNT BRKT W/232A | 810-000012 | ||||
| OBS-MAGNET MOUNT EZ | 810-000013 | ||||
| EZ-100 SHAFT MNT BRKT W/232 | 810-000017 | ||||
| EZ-MOUNT BRACKET W/255A-EZ AND U-BOLT | 810-000021 | ||||
| EZ-3/4IN SENSOR 16 MAGNETS | 810-000040 | ||||
| EZ-18mm SENSOR 16 MAGNETS | 810-000041 | ||||
| EZ-18mm SENSOR 8 MAGNETS | 810-000042 | ||||
| EZ-18mm SENSOR 4 STEEL SLUGS | 810-000043 | ||||
| EZ-12mm SENSOR 1 STEEL SLUG | 810-000044 | ||||
| EZ-8mm SENSOR 1 STEEL SLUG | 810-000045 | ||||
| MM-2.00 MOUNTING MAGNET | 810-000050 | ||||
| MM-1.25 MOUNTING MAGNET | 810-000060 | ||||
| EZ Mounting Brackets Accessories | |||||
| Buyout Product | |||||
| IS Barriers Accessories | |||||
| Model | Notes | Part Number | |||
| BARRIER 772 INTRINSICALLY SAFE | For isolating pulse sensors from 15-18 VDC tachometers: TR, CT, MS PRODUCTS | 597-000100 | |||
| BARRIER 778 INTRINSICALLY SAFE | For isolating pulse sensors from 24 VDC PLCs | 597-000101 | |||
| BARRIER 765AC INTRINSICALLY SAFE | For isolating pulse sensors from the AP or SCU200 with tilt | 597-000102 | |||
| BARRIER 7787+ INTRINSICALLY SAFE | For ST420 or TT420. DO NOT USE WITH DI or LT | 597-000104 | |||
| IS Barriers Accessories | |||||
| Miscellaneous Accessories | |||||
| Model | Notes | Part Number | |||
| HOUSING XP GRB MACHINED | DR1000, UDS1000 | 305-000600 | |||
| MAGNET BAR 1.50 X .50 X .25 | 505-000300 | ||||
| MAGNET BUTTON .50 DIA X .250 | 505-000200 | ||||
| MAGNET MINI .250 DIA X .1875 | 505-001100 | ||||
| ADHESIVE EPOXY KIT | 217-003200 | ||||
| FILTER AP1000 RED | AP1000 | 284-007700 | |||
| BEZEL SMALL ENCLOSURE AP1000 | AP1000 | 284-001800 | |||
| ENCLOSURE PANEL AP1000 MOD | AP1000 | 284-001701 | |||
| OBS-SOCKET 11 PIN OCTAL LRB SERIES | LRB, SA420, SS110 | 569-006100 | |||
| REFLECTIVE TABS | HH-100 (qty 35) | 972-006000 | |||
| FACEPLATE KIT MS196 ML196 | MS196/ML196 | 725-000003 | |||
| FACEPLATE KIT MS320 | MS320 | 725-000008 | |||
| DIN RAIL 7.55mm X 35mm X 3in | per meter | 260-000100 | |||
| Miscellaneous Accessories | |||||
| Options Accessories | |||||
| Model | Notes | Part Number | |||
| TAG STAINLESS STEEL 1.875 X .625 | 213-000200 | ||||
| TAG STAINLESS STEEL 3 X 1.5 | 213-000201 | ||||
| LABEL PLASTIC BLACK 2 X .50 | 214-001600 | ||||
| EPOXY COATING | Any one component | 991-000001 | |||
| EPOXY ENCAPSULATION ANY COMPONENT | Any one component | 991-000008 | |||
| CONFORMAL COATING | Any one component | 991-000003 | |||
| Options Accessories | |||||
| Cable Accessories | |||||
| Model | Notes | Part Number | |||
| CABLE 22AWG 3 COND SHIELDED | 3-wire sensors | 610-000200 | |||
| CABLE 22AWG 3 CONDUCTOR TEFLON | 3-wire sensors | 620-000400 | |||
| CABLE 22AWG 4 COND SHIELDED | 4-wire sensors | 610-000500 | |||
| CABLE 24AWG SHIELDED ALPHA 5092C | ST420/TT420 | 610-003100 | |||
| CABLE 22AWG 4 CONDUCTOR TEFLON | 4-wire sensors | 620-000401 | |||
| CABLE 18 AWG 4 COND CAROLPRENE JACKET | DOMINO | 620-000300 | |||
| AS-Interface Speed Alarm Shaft Speed Switches | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| ASiSA | 800-001300 | |
| ASiSA 2 (MULTI-INPUT) | 800-001301 | |
| AS-Interface Speed Alarm Shaft Speed Switches | ||
| DMS Series Shaft Speed Switches | ||
| Typical system also requires Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| DMS SPEEDSWITCH AC INPUT 5-100 RPM | 800-001800 | |
| DMS SPEEDSWITCH AC INPUT 100-5000 RPM | 800-001810 | |
| DMS SPEEDSWITCH +24VDC 5-100 RPM | 800-001820 | |
| DMS SPEEDSWITCH +24VDC 100-5000 RPM | 800-001830 | |
| DMS SPEEDSWITCH +12VDC 5-100 RPM | 800-001840 | |
| DMS SPEEDSWITCH +12VDC 100-5000 RPM | 800-001850 | |
| DMS Series Shaft Speed Switches | ||
| DR1000 Shaft Speed Switches | ||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| DR1000 115VAC | 800-050101 | |
| DR1000 230VAC | 800-050102 | |
| DR1000 12VDC | 800-050103 | |
| DR1000 24VDC | 800-050104 | |
| DR1000 Shaft Speed Switches | ||
| FB420 Shaft Speed Switches | ||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| FB420 XP FINAL ASSY | 800-045000 | |
| FB420 Shaft Speed Switches | ||
| LRB1000 / 2000 Shaft Speed Switches | ||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| LRB1000 SPEED SWITCH 115V | 800-076000 | |
| LRB1000 SPEED SWITCH 230V | 800-076001 | |
| LRB1000 SPEED SWITCH 24VDC | 800-076010 | |
| LRB1000 SPEED SWITCH 12VDC | 800-076011 | |
| LRB1000 SPEED SWITCH 36VDC | 800-076013 | |
| LRB1000 SPEED SWITCH 115V PNP | 800-076100 | |
| LRB1000 SPEED SWITCH 230V PNP | 800-076101 | |
| LRB1000 SPEED SWITCH 24V PNP | 800-076102 | |
| LRB1000 SPEED SWITCH 12V PNP | 800-076103 | |
| LRB2000 SPEED SWITCH 115V | 800-076002 | |
| LRB2000 SPEED SWITCH 230V | 800-076003 | |
| LRB2000 SPEED SWITCH 24VDC | 800-076008 | |
| LRB2000 SPEED SWITCH 12VDC | 800-076009 | |
| LRB1000 / 2000 Shaft Speed Switches | ||
| M100 / 5000 PVC100 / 5000 Shaft Speed Switches | ||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| M100 SPEED SWITCH | 775-007700 | |
| M100PVC SPEED SWITCH | 775-007710 | |
| M5000 SPEED SWITCH | 775-007800 | |
| M5000-PVC SPEED SWITCH | 775-007810 | |
| M100 / 5000 PVC100 / 5000 Shaft Speed Switches | ||
| M100T / 5000T Shaft Speed Switches | ||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| M100T SPEED SWITCH 230VAC | 800-001760 | |
| M100T SPEEDSWITCH 115VAC FINAL ASSY | 800-001700 | |
| M100T SPEEDSWITCH 12VDC FINAL ASSY | 800-001720 | |
| M100T SPEEDSWITCH 24VDC FINAL ASSY | 800-001740 | |
| M5000T SPEED SWITCH 230VAC | 800-001770 | |
| M5000T SPEEDSWITCH 115VAC FINAL ASSY | 800-001710 | |
| M5000T SPEEDSWITCH 12VDC FINAL ASSY | 800-001730 | |
| M5000T SPEEDSWITCH 24VDC FINAL ASSY | 800-001750 | |
| M100T / 5000T Shaft Speed Switches | ||
| SCP1000 / 2000 Shaft Speed Switches | ||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| SCP1000 SPEED SWITCH 115VAC | 800-020100 | |
| SCP1000 SPEED SWITCH 12VDC | 800-023100 | |
| SCP1000 SPEED SWITCH 230VAC | 800-021100 | |
| SCP1000 SPEED SWITCH 24VDC | 800-022100 | |
| SCP2000 SPEED SWITCH 115VAC W/JACK | 800-040100 | |
| SCP2000 SPEED SWITCH 12VDC | 800-043100 | |
| SCP2000 SPEED SWITCH 230VAC W/JACK | 800-041100 | |
| SCP2000 SPEED SWITCH 24VDC | 800-042100 | |
| SCP1000 / 2000 Shaft Speed Switches | ||
| SS110 Shaft Speed Switches | ||
| Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| SS110 SLOW SPEED SWITCH 115VAC | 800-077000 | |
| SS110 SLOW SPEED SWITCH 230 VAC | 800-077001 | |
| SS110 SLOW SPEED SWITCH 24VDC | 800-077002 | |
| SS110 SLOW SPEED SWITCH 12VDC | 800-077003 | |
| OBS SS110 FINGERSAFE 115VAC | 800-077100 | |
| OBS SS110 FINGERSAFE 230VAC | 800-077101 | |
| OBS SS110 FINGERSAFE 24VDC | 800-077102 | |
| OBS SS110 FINGERSAFE 12VDC | 800-077103 | |
| SS110 Shaft Speed Switches | ||
| UDS1000 Shaft Speed Switches | ||
| Typical system also requires Sensor (not included) and Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| UDS 115VAC | 800-050113 | |
| UDS 12VDC | 800-050115 | |
| UDS 230VAC | 800-050114 | |
| UDS 24VDC | 800-050116 | |
| UDS1000 Shaft Speed Switches | ||
| 1101 / 931 Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| SENSOR 931 W/10′ CABLE | With bracket | 775-093100 |
| SENSOR 931 W/TEFLON CABLE | With bracket | 775-093101 |
| SENSOR 931 W/50′ CABLE | With bracket | 775-093105 |
| SENSOR 931 W/100′ CABLE | With bracket | 775-093110 |
| 1101 18-36V HI TEMP 10′ PVC W/LBKT | For automotive 24V appl. | 775-110001 |
| 1101 SS 3.75″ HE 10′ PVC W/O LBKT | Used on Ring Kits | 775-110003 |
| 1101 SS 3.75″ HE 50′ PVC W/O LBKT | Used on Ring Kits | 775-110004 |
| 1101 SS 3.75″ HE 100′ PVC W/O LBKT | Used on Ring Kits | 775-110005 |
| 1101 SS 2.0″ HE 10′ PVC W/O LBKT | 775-110100 | |
| 1101 STD SS 2.0″ HE 10′ PVC W/LBKT | 775-110101 | |
| 1101 SS 2.0″ HE 50′ PVC W/O LBKT | 775-110105 | |
| 1101 STD SS 2.0″ HE 50′ PVC W/LBKT | 775-110106 | |
| 1101 SS 2.0″ HE 100′ PVC W/O LBKT | 775-110110 | |
| 1101 STD SS 2.0″ HE 100′ PVC W/LBKT | 775-110111 | |
| 1101 SS 2.0″ HE 10′ TEFLON W/O LBKT | 775-110114 | |
| 1101 SS 2.0″ HE 10′ TEFLON W/LBKT | 775-110121 | |
| 1101 / 931 Shaft Speed Sensors | ||
| 1102 / 932 / 933 XP Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| 932 STD AL BODY MR 10′ PVC W/LBKT | 775-093200 | |
| 932 AL BODY MR 50′ PVC W/LBKT | 775-093201 | |
| 932 AL BODY MR 100′ PVC W/LBKT | 775-093202 | |
| 932 SS BODY MR 10′ PVC W/LBKT | 775-093203 | |
| 932 SS BODY MR 50′ PVC W/LBKT | 775-093204 | |
| 932 SS BODY MR 100′ PVC W/LBKT | 775-093205 | |
| OBS SENSOR 932-SS W/SEALED END 10FT | 775-093207 | |
| SENSOR 933 W/10′ CABLE | 775-093300 | |
| SENSOR 933 W/50′ CABLE | 775-093301 | |
| SENSOR 933 W/100′ CABLE | 775-093302 | |
| SENSOR 933 LARGE XP SENSOR | 775-093303 | |
| 1102 SS 3.75″ MR 10′ PVC W/O LBKT | Used on Ring Kits | 775-110006 |
| 1102 SS 3.75″ MR 50′ PVC W/O LBKT | Used on Ring Kits | 775-110007 |
| 1102 SS 3.75″ MR 100′ PVC W/O LBKT | Used on Ring Kits | 775-110008 |
| 1102 SS 2.0″ MR 10′ PVC W/O LBKT | 775-110200 | |
| 1102 SS 2.0″ MR 10′ PVC W/LBKT | 775-110201 | |
| 1102 SS 2.0″ MR 50′ PVC W/O LBKT | 775-110205 | |
| 1102 SS 2.0″ MR 50′ PVC W/LBKT | 775-110206 | |
| 1102 SS 2.0″ MR 100′ PVC W/O LBKT | 775-110210 | |
| 1102 SS 2.0″ MR 100′ PVC W/LBKT | 775-110211 | |
| 1102 / 932 / 933 XP Shaft Speed Sensors | ||
| 1201 / 1202 Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| 1201 SS 3.75″ BIDI 10′ PVC W/RK BLOCK | Used on Ring Kits. Small quadrature sensor | 775-120101 |
| 1202 SS 5.5″ BIDO 10′ PVC W/RK BLOCK | Used on Ring Kits. Large quadrature sensor | 775-120201 |
| 1201 / 1202 Shaft Speed Sensors | ||
| Buyout Product | ||
| 600 Series Shaft Speed Sensors | ||
| Model | Notes | Part Number |
| SENSOR 608 PROXIMITY 8MM | 775-007208 | |
| SENSOR 612 PROXIMITY 12MM | 775-007206 | |
| SENSOR PROXIMITY 14mm | 775-007209 | |
| SENSOR 618 PROXIMITY 18MM | 775-007205 | |
| SENSOR 630 PROXIMITY 30MM | 775-007204 | |
| SENSOR 608-1 PROXIMITY 8MM | Shielded | 775-007201 |
| SENSOR 612-1 PROXIMITY 12MM | Shielded | 775-007202 |
| SENSOR 618-1 PROXIMITY 18MM | Shielded | 775-007207 |
| SENSOR 630-1 PROXIMITY 30MM | Shielded | 775-007203 |
| 600 Series Shaft Speed Sensors | ||
| 906 / 907 XP Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| 906 STD AL BODY HE 10′ PVC W/LBKT | 775-000500 | |
| 906 AL BODY HE 50′ PVC W/LBKT | 775-000511 | |
| 906 AL BODY HE 100′ PVC W/LBKT | 775-000505 | |
| 906 BIDI AL BODY HE 10′ PVC W/LBKT | 775-000504 | |
| 906 BIDI AL BODY HE 50′ PVCW/LBKT | 775-000509 | |
| 906 BIDI AL BODY HE 10O’ PVC W/LBKT | 775-000510 | |
| 906 SS BODY HE 10′ PVC W/LBKT | 775-000400 | |
| 906 SS BODY HE 50′ PVC W/LBKT | 775-000405 | |
| 906 SS BODY HE 100′ PVC W/LBKT | 775-000410 | |
| 906 BIDI SS BODY HE 10′ PVC W/LBKT | 775-000404 | |
| 906 BIDI SS BODY HE 50′ PVC W/LBKT | 775-000409 | |
| 906 BIDI SS BODY HE 100′ PVC W/LBKT | 775-000414 | |
| SENSOR 907 W/10′ CABLE | 775-000600 | |
| SENSOR 907BV XP BI-DI 10′ | 775-006100 | |
| 907 BIDI VERT ALIGN XLB3 HE 50′ PVC | 775-006105 | |
| SENSOR 907BV XP BI-DI 100′ | 775-006110 | |
| SENSOR 907BH XP BI-DI 10′ | 775-006101 | |
| 906 / 907 XP Shaft Speed Sensors | ||
| 916A / 917A XP Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| SENSOR 916A 10FT W/BRKT | 775-000801 | |
| SENSOR 916A 50FT W/BRKT | 775-000802 | |
| SENSOR 916A 100FT W/BRKT | 775-000803 | |
| SENSOR 916A 10FT TEFLON W/BRKT | 775-000804 | |
| SENSOR 916A 50FT TEFLON W/BRKT | 775-000805 | |
| SENSOR 916A 100FT TEFLON W/BRKT | 775-000806 | |
| SENSOR 916A 10FT W/STANDARD BRACKET | 775-000807 | |
| SENSOR 916A 50FT W/STANDARD BRACKET | 775-000808 | |
| SENSOR 916A 100FT W/STANDARD BRACKET | 775-000809 | |
| SENSOR 916A SS 10FT W/SS BRACKET | 775-000810 | |
| SENSOR 917A 10FT W/BRKT | 775-000811 | |
| SENSOR 917A 50FT W/BRKT | 775-000812 | |
| SENSOR 917A 100FT W/BRKT | 775-000813 | |
| 916A / 917A XP Shaft Speed Sensors | ||
| HE950 Shaft Speed Sensors | ||
| Model | Notes | Part Number |
| SENSOR HE950 10′ W/BRACKET | 775-001400 | |
| SENSOR HE950 50′ W/BRACKET | 775-001401 | |
| SENSOR HE950 100′ W/BRACKET | 775-001402 | |
| SENSOR HE950 10′ TEFLON W/BRACKET | 775-001403 | |
| HE950 Shaft Speed Sensors | ||
| Series 18 Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| 18EHQNO-000 | ||
| 18EHQNT-000 | ||
| 18EHQPO-000 | ||
| 18EHQPT-000 | ||
| 18EHSNO-000 | ||
| 18EHSNT-000 | ||
| 18EHSPO-000 | ||
| 18EHSPT-000 | ||
| 18EMSNO-000 | ||
| 18EMSNT-000 | ||
| 18EMSPO-000 | ||
| 18EMSPT-000 | ||
| Series 18 Shaft Speed Sensors | ||
| SpeedTalker DeviceNet Shaft Speed Sensors | ||
| Typical system also requires Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| SPEEDTALKER-DN (XP) | 800-001100 | |
| SPEEDTALKER-DN (BH) | 800-001200 | |
| SPEEDTALKER-DN (UI) | 800-001400 | |
| SpeedTalker DeviceNet Shaft Speed Sensors | ||
| ST420 Shaft Speed Sensors | ||
| Typical system also requires a Pulser Disc (not included) or WRAP (not included) | ||
| Model | Notes | Part Number |
| ST420-L 2 – 200 RPM, 8 PPR | 800-001600 | |
| ST420-H 2 – 2000 RPM, 8 PPR | 800-001601 | |
| ST420-C-0019 0.2 – 200 RPM, 8 PPR | 800-001620 | |
| ST420-C-0020 0.2 – 2000 RPM, 8 PPR | 800-001621 | |
| ST420-DI-L 2 – 200 RPM, 8 PPR | 800-001900 | |
| ST420-DI-H 2 – 2000 RPM, 8 PPR | 800-001901 | |
| ST420-DI-C-0019 0.2 – 200 RPM, 8 PPR | 800-001920 | |
| ST420-DI-C-0020 0.2 – 2000 RPM, 8 PPR | 800-001921 | |
| ST420-LT-L 2 – 200 RPM, 8 PPR | 800-004100 | |
| ST420-LT-H 2 – 2000 RPM, 8PPR | 800-004101 | |
| ST420-LT-C-0019 0.2 – 200 RPM, 8 PPR | 800-004120 | |
| ST420-LT-C-0020 0.2 – 2000 RPM, 8 PPR | 800-004121 | |
| ST420 Shaft Speed Sensors | ||
| Digital Ring Kits Shaft Speed Pulse Generators | ||
| Model | Notes | Part Number |
| Small ring kit: NEMA 56C, 5/8″ bore | ||
| DRK56C RING KIT 1101 199SM .625 | 775-210625 | |
| DRK56C RING KIT 1102 199SM .625 | 775-230625 | |
| Small ring kit: NEMA 143TC, 145TC, 182C, 184C, 7/8″ bore | ||
| DRK143TC RING KIT 1101 199SM .875 | 775-210875 | |
| DRK143TC RING KIT 1102 199SM .875 | 775-230875 | |
| Large ring kit: NEMA 182TC, 184TC, 213C, 215C, 254C, 1-1/8″ bore | ||
| DRK182TC RING KIT 1101 199SM 1.125 | 775-221125 | |
| DRK182TC RING KIT 1102 199SM 1.125 | 775-241125 | |
| Large ring kit: NEMA 213TC, 215TC, 254UC, 256UC, 1-3/8″ bore | ||
| DRK213TC RING KIT 1101 199SM 1.375 | 775-221375 | |
| DRK213TC RING KIT 1102 199SM 1.375 | 775-241375 | |
| Large ring kit: NEMA 254TC, 256TC, 1-5/8″ bore | ||
| DRK254TC RING KIT 1101 199SM 1.625 | 775-221625 | |
| DRK254TC RING KIT 1102 199SM 1.625 | 775-241625 | |
| Small Quadrature ring kit: NEMA 56C, 5/8″ bore | ||
| QDRK56C QUAD RING 1201 199SM .625 | 775-250625 | |
| QDRKL-56C QUAD RING KIT LINE DRIVER | 775-280625 | |
| Small Quadrature ring kit: NEMA 143TC, 145TC, 182C, 184C, 7/8″ bore | ||
| QDRK143TC QUAD RING 1201 199SM .875 | 775-250875 | |
| QDRKL-143TC QUAD RING KIT LINE DRIVER | 775-280875 | |
| Large Quadrature ring kit: NEMA 182TC, 184TC, 213C, 215C, 254C, 1-1/8″ bore | ||
| QDRK182TC QUAD RING 1202 199SM 1.125 | 775-261125 | |
| Large Quadrature ring kit: NEMA 213TC, 215TC, 254UC, 256UC, 1-3/8″ bore | ||
| QDRK213TC QUAD RING 1202 199SM 1.375 | 775-261375 | |
| Large Quadrature ring kit: NEMA 254TC, 256TC, 1-5/8″ bore | ||
| QDRK254TC QUAD RING 1202 199SM 1.625 | 775-261625 | |
| Digital Ring Kits Shaft Speed Pulse Generators | ||
| 100% Japan Origin | Towa Seiden Vietnam | Model: HL-400Z Length 85mm Rotary Paddle Type Level Switch Paddle: W-35x80mm |
| 100% Japan Origin | Towa Seiden Vietnam | Model: HL-400GZ Length 150mm Rotary Paddle Type Level Switch Paddle: W-35x80mm |
| 100% Japan Origin | Towa Seiden Vietnam | Model: HL-400GZ Length 150mm Rotary Paddle Type Level Switch Paddle: W-35x55mm |
| 100% Japan Origin | Towa Seiden Vietnam | Model: HL-400GZ Length 200mm Rotary Paddle Type Level Switch Paddle: W-35x80mm |
| 100% Japan Origin | Towa Seiden Vietnam | Model: HL-400GZ Length 200mm Rotary Paddle Type Level Switch Paddle: W-35x55mm |
Liên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
lien.ans@ansvietnam.com
Trực tiếp Zalo: 0902937088
QUÉT NHANH MÃ QR ZALO:
=====================================================
Click xem thêm ứng dụng sản phẩm khác
Đại lý phân phối chính hãng tại Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
Xem thêm sản phẩm hãng Towa Seiden đây
Đánh giá
Chưa có đánh giá nào.