DỊCH VỤ
Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML
iên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
lien.ans@ansvietnam.com
Trực tiếp Zalo: 0902937088
Raytek Vietnam,Nhiệt kế hồng ngoại nhiệt độ cao Raytek RAYR3IPLUS2ML
Raytek RAYR3IPLUS2ML
ANS tự hào được sinh ra và mang trong mình sứ mệnh là đáp ứng tất cả các nhu cầu cũng như giúp Quý khách hàng tối ưu hóa các giải pháp khắc phục mọi vấn đề trong ngành công nghiệp điện tử tự động một cách hiệu quả nhất.
Chuyên nghiệp về kỹ thuật, chăm sóc khách hàng và sự hỗ trợ nhiệt tình từ các nhà sản xuất, chúng tôi luôn tự tin đáp ứng mọi yêu cầu của quý khách hàng .
Với khuynh hướng tiến cùng thời đại, phương châm của ANS chúng tôi là giúp quý khách hàng tiếp cận các thiết bị kỹ thuật hiện đại với cách sử dụng rất đơn giản, an toàn và nhanh nhất.
“Hành động kịp thời – Đáp ứng nhanh chóng – Dẫn đầu tự động – Đi đầu cải tiến”
Thêm vào đó, đội ngũ vận chuyển hàng hóa trên toàn cầu – hàng hóa nhập khẩu hàng tuần, đảm bảo thời gian, tiết kiệm chi phí, đến với ANS, bạn (quý khách)sẽ nhận được sự phục vụ tốt nhất.
Xem thêm: Các thương hiệu nổi tiếng trên thế giới mà công ty chúng tôi phân phối
SẢN PHẨM
Nhiệt kế hồng ngoại nhiệt độ cao Raytek 3I PLUS – 3I PLUS Series High Temp IR Thermometers
Raytek 3I PLUS Nhiệt kế hồng ngoại Raytek IR thế hệ mới được thiết kế để sử dụng trong các ứng dụng công nghiệp nhiệt độ cao, 400 đến 3000 ° C (752 đến 5432 ° F), chẳng hạn như sắt, thép, luyện kim loại, đúc và chế biến, gốm sứ, chất bán dẫn, hóa chất và hóa dầu lò nung, cũng như xử lý nhiệt và nhà máy điện. Nhiệt kế Raytek 3i Plus có tính năng truyền dữ liệu nhanh chóng và dễ dàng sang PC hoặc điện thoại thông minh, một ứng dụng di động để cộng tác và truyền dữ liệu nhanh chóng, đồng thời có thể được sử dụng như một nhiệt kế trực tuyến tạm thời.
Đặc điểm Raytek 3I PLUS:
- Dải nhiệt độ từ 400 đến 3000ºC (752 đến 5432ºF)
- Nhiệt độ môi trường xung quanh: 0 đến 50ºC (32 đến 120ºF)
- Tùy chọn ngắm laser và ngắm phạm vi kép để nhắm mục tiêu đo nhanh chóng và đơn giản
- Độ phân giải quang học cao: 250: 1, đảm bảo đọc nhiệt độ chính xác ở khoảng cách xa hơn
- Công nghệ nhìn Red Dot để nhắm mục tiêu chính xác dựa trên vật thể còn nóng
- Máy dò và cảnh báo chịu nhiệt “Red Nose “
- Lưu trữ dữ liệu: lên đến 4.900 đơn vị với vị trí, ngày tháng và thời gian
- Công nghệ không dây Bluetooth® để giao tiếp với thiết bị di động
- Lập hồ sơ phần mềm máy tính cá nhân (PC)
Mã đặt hàng nhiệt kế hồng ngoại Raytek 3I PLUS
- Raytek RAYR3IPLUS2ML
- Raytek RAYR3IPLUS2MSCL
- Raytek RAYR3IPLUS1MSCL
- Raytek RAYR3IPLUS1ML
Phụ kiện 3I PLUS:
- Pin Lithium-Ion Raytek XXXR3IPLUSACCU
- Túi đựng Raytek XXXR3IPLUSCC
- Bộ chuyển đổi cổng USB và phích cắm nguồn Raytek XXXR3IPLUSPS
- Bộ chuyển đổi giắc cắm USB sang DC Raytek XXXR3IPLUSPSCON
- Dây treo Raytek XXXR3IPLUSSTRAP
USB Raytek XXXR3IPLUSUSBCB
| Raytek® Compact CM | ||
| VOLTAGE OUTPUT (Linear, scaleable from 0-5V) | ||
| RAYCMLTV | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTVM | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing | |
| RAYCMLTV3 | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTV3M | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing | |
| TYPE J THERMOCOUPLE OUTPUT | ||
| RAYCMLTJ | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTJM | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing | |
| RAYCMLTJ3 | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTJ3M | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing | |
| TYPE K THERMOCOUPLE OUTPUT | ||
| RAYCMLTK | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTKM | -20 to 500°C (-4 – 932°F) range, 1 m (3.3 ft.) cable, 18Mx1 metric threaded SS housing | |
| RAYCMLTK3 | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 0.75 – 16UNF 2A threaded SS housing | |
| RAYCMLTK3M | -20 to 500°C (-4 – 932°F) range, 3 m (10 ft.) cable, 18Mx1 metric threaded SS housing | |
| ACCESSORIES | ||
| XXXCMACMN | Stainless steel mounting nuts (2) | |
| XXXCMACMNM | Stainless steel mounting nuts (2) metric threads | |
| XXXCIACFB | Stainless Steel Fixed Bracket | |
| XXXCIADJB | Stainless Steel Adjustable Bracket | |
| XXXCMACAP | Stainless Steel Air Purge Collar | |
| XXXCMACAPM | Metric Air Purge Collar for metric threaded housing | |
| XXXCMACRA | Right Angle Mirror | |
| XXXCMACRAM | Right Angle Mirror, metric thread | |
| XXXCIDCPS | DIN mount 24VDC, 125mA switching power supply (110/220V input) | |
| XXXCI1CON | Thermocouple cable extension connector kit for CMJ models | |
| XXXCI2CON | Thermocouple cable extension connector kit for CMK model | |
| RAYGPC | Panel mount meter and power supply 110/220VAC for CM sensors | |
| XXXCMACPW | Protective Silicon window for CM sensors | |
| XXXCMACPWM | Protective Silicon window for Metric CM sensors | |
| XXXCMCOMM | Communications kit for CM sensors | |
| LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F) | ||
| XXXCI1CB50 | Extension cable for CI1; 15 meter (50 feet) Requires XXXCI1CON when ordering | |
| XXXCI1CB100 | Extension cable for CI1; 30 meter (100 feet) Requires XXXCI1CON when ordering | |
| XXXCI2CB50 | Extension cable for CI2; 15 meter (50 feet) Requires XXXCI2CON when ordering | |
| XXXCI2CB100 | Extension cable for CI2; 30 meter (100 feet) Requires XXXCI2CON when ordering | |
| XXXCI3CB50 | Extension cable for CI3; 15 meter (50 feet) | |
| XXXCI3CB100 | Extension cable for CI3; 30 meter (100 feet) | |
| HIGH TEMP EXTENSION CABLES (maximum ambient 260° C, 500° F) | ||
| XXXCIACCB50H | High temperature cable; 15 meter (50 feet) (260° C; 500° F) | |
| XXXCIACCB100H | High temperature cable; 30 meter (100 feet) (260° C; 500° F) | |
| CI Series Compact IR Sensors | ||
| RAYCI | Raytek Compact CI Infrared Pyrometer Series | |
| RAYCI1B | Raytek RAYCI1B Infrared Temperature Sensor, Type J Output, 100 to 500°C (212 to 932°F) | |
| RAYCI1A | Raytek RAYCI1A Infrared Temperature Sensor, Type J Output, 0 to 115°C (32 to 240°F) | |
| RAYCI1A10L | Raytek RAYCI1A10L Infrared Temperature Sensor with 1 m Cable, Type J Output, 32 to 662°F (0 to 350°C) | |
| Raytek RAYCI3A Infrared Temperature Sensor, 0-5VDC Output, 0 to 115°C (32 to 240°F) | ||
| Raytek RAYCI3A50L Infrared Temperature Sensor with 15m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F) | ||
| Raytek RAYCI3B Infrared Temperature Sensor, 0-5VDC Output, 100 to 500°C (212 to 932°F) | ||
| Raytek RAYCI2A Infrared Temperature Sensor, Type K Output, 0 to 115°C (32 to 240°F) | ||
| Raytek RAYCI2B Infrared Temperature Sensor, Type K Output, 100 to 500°C (212 to 932°F) | ||
| Raytek RAYCI2B10L Infrared Temperature Sensor with 3m Cable, Type K Output, 100 to 500°C (212 to 932°F) | ||
| Raytek RAYCI2B50L Infrared Temperature Sensor with 15m Cable, Type K Output, 100 to 500°C (212 to 932°F) | ||
| Raytek RAYCI3A10L Infrared Temperature Sensor with 3m Cable, 0-5VDC Output, 0 to 115°C (32 to 240°F) | ||
| ACCESSORIES FOR CI SERIES | ||
| XXXCIACWC | CI Water-cooled Housing Only (For units with high temperature cable) | |
| XXXCIACMN | Mounting nuts (2) | |
| XXXCIACMNM | Metric Mounting nuts (2) | |
| XXXCIACFB | Fixed bracket | |
| XXXCIADJB | Adjustable bracket | |
| XXXCIAP | Air Purge Collar (aluminum) | |
| XXXCIACAP | Air Purge Collar (stainless) | |
| XXXCIACAPM | Metric Air Purge Collar for metric threaded housing | |
| XXXCIACRA | Right angle mirror (Not For Use With Water Cooled Option, (product not available in metric) | |
| XXXCIDCPS | DIN mount 24VDC, 125mA switching power supply (110/220V input) | |
| XXXCI1CON | Thermocouple cable extension connector kit for CI1 model | |
| XXXCI2CON | Thermocouple cable extension connector kit for CI2 model | |
| RAYGPC | Panel mount meter and power supply 110/220VAC for CI | |
| CI LOW TEMP EXTENSION CABLES (maximum ambient 105°C, 220°F) | ||
| XXXCI1CB50 | Extension cable for CI1; 15 meter (50 feet) | |
| XXXCI1CB100 | Extension cable for CI1; 30 meter (100 feet) | |
| XXXCI1CON | XXXCI1CON,T/C EXTENSION CONN. KIT FOR CI1 MODEL | |
| XXXCI2CB50 | Extension cable for CI2; 15 meter (50 feet) | |
| XXXCI2CB100 | Extension cable for CI2; 30 meter (100 feet) | |
| XXXCI2CON | XXXCI2CON,T/C EXTENSION CONN. KIT FOR CI2 MODEL | |
| XXXCI3CB50 | Extension cable for CI3; 15 meter (50 feet) | |
| XXXCI3CB100 | Extension cable for CI3; 30 meter (100 feet) | |
| CI HIGH TEMP EXTENSION CABLE FOR USE WITH ALL CI1, CI2, & CI3 UNITS (maximum ambient 260˚C, 500˚F) | ||
| XXXCIACCB50H | High temperature cable; 15 meter (50 feet) (260° C; 500° F) | |
| XXXCIACCB100H | High temperature cable; 30 meter (100 feet) (260° C; 500° F) | |
| MI3 Series Miniature Infrared Sensors | ||
| STANDARD MI3 SERIES LOW TEMPERATURE SENSING HEADS | ||
| RAYMI310LTS | -40 to 600°C (-40 to 1112°F), 8 – 14 µm, 10:1, 130 msec, 1m cable | |
| RAYMI320LTS | 0 to 1000°C (32 to 1832°F), 8 – 14 µm, 22:1, 130 msec, 1m cable | |
| RAYMI302LTS | -40 to 600°C (-40 to 1112°F), 8 – 14 µm, 2:1, 130 msec, 1m cable | |
| FAST RESPONSE MI3 SERIES LOW TEMPERATURE SENSING HEADS | ||
| RAYMI310LTF | 0 – 1000°C (32 – 1832°F), 8 – 14 µm, 10:1, 20 msec, 1m cable | |
| 5 MICRON SENSING HEADS FOR GLASS APPLICATIONS | ||
| RAYMI310G5S | 250 to 1650°C, 5 µm, D:S 10:1, 130 msec, 1m cable | |
| HIGH AMBIENT MI3 SERIES SENSING HEADS LOW TEMPERATURE SENSING HEADS | ||
| RAYMI310LTH | -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 msec, 1m cable | |
| RAYMI320LTH | 0 to 1000°C, 8 to 14 µm, D:S 22:1, 130 msec, 1m cable | |
| Raytek RAYMI310LTSCB8 Infrared Temperature Sensor with 8m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) | ||
| Raytek RAYMI310LTSCB15 Infrared Temperature Sensor with 15m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) | ||
| Raytek RAYMI310LTSCB3 Infrared Temperature Sensor with 3m Cable, 10:1 Optics, -40 to 600°C (-40 to 1112°F) | ||
| Raytek RAYMI302LTSCB30 Infrared Temperature Sensor with 30m Cable, 2:1 Optics, -40 to 600°C (-40 to 1112°F) | ||
| XXXMI3CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | |
| SYSTEM EXPANSION ACCESSORIES | ||
| XXXMI3CONNBOX | Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4′) cable to connect to MI3 or MI3M communications module. | |
| XXXUSB485 | USB to RS232/422/485 converter | |
| RAYMI3COMMI | Installation of MI3 sensing head with MI3/MI3M communications box | |
| MECHANICAL ACCESSORIES | ||
| XXXMIACMN | Sensing head mounting nuts – 5 pieces | |
| XXXMIACFB | Sensing head fixed mounting bracket | |
| XXXMIACAB | Sensing head adjustable mounting bracket | |
| XXXMIACAJ | Air purge jacket (no cooling) – For use in ambient temperatures <200°C (<392°F). | |
| XXXMIACAJI | Air purge jacket (no cooling) – installed, for MI3xxLTH only possible option – For use in ambient temperatures <200°C (<392°F). | |
| XXXMIACCJ | Air cooling and purging system with .8m (2.8′) insulated air hose. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. | |
| XXXMIACCJ1 | Air cooling and purging system with 2.8m (9.2′) insulated air hose. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. | |
| XXXMIACRAJ1 | Right angle mirror with air purging systems. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. | |
| XXXMIACRAJ | Right angle mirror for use with air cooling and purging systems. For use in ambient temperatures <200°C (<392°F). Not compatible with MI3LTH. | |
| XXXMIACPW | Zinc Sulfide protective window for MI sensors. Not for use with air purging or air cooling systems. | |
| XXXMI3ACPWP | Polymer protective window for MI3 sensors. Not for use with air purging or air cooling systems. | |
| XXXMI3ACCFL | MI3 Close Focus Lens Accessory, 10mm focus distance. LT models only. | |
| D82MIACAJ | Stainless steel air purge jacket (no cooling) – For use in ambient temperatures <200°C (<392°F) | |
| XXXUSBCABLE | USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M | |
| MI3 1M, 2M Series | ||
| STANDARD MI3 HIGH TEMPERATURE SENSING HEADS: 1M AND 2M SENSING HEADS ARE RATED FOR A MAXIMUM AMBIENT TEMPERATURE OF 120°C (<250°F) | ||
| RAYMI31001MSF1 | 500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable | |
| RAYMI31001MSF3 | 500 to 1,800°C (932 to 3,272°F), 1 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable | |
| RAYMI31002MSF1 | 250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 200mm Focus, 10 msec, 1m cable | |
| RAYMI31002MSF3 | 250 to 1,400°C (482 to 2,552°F), 1.6 µm, 100:1 D:S, 2,200mm Focus, 10 msec, 1m cable | |
| 1M and 2M sensing heads are rated for a maximum ambient temperature of 120°C (<250°F) | ||
| SYSTEM EXPANSION ACCESSORIES | ||
| XXXMI3CONNBOX | Multi-channel sensor interface box for MI3 and MI3M series communications modules. Includes 8 sets of field wiring terminals wired in parallel to one 5 meter (16.4′) cable to connect to MI3 or MI3M communications module. | |
| XXXUSBCABLE | USB cable assembly, 4 COND, USB-A(M), USB-MINI-B(M), Shielded, 2M | |
| XXXUSB485 | USB to RS232/422/485 converter | |
| XXXSYSPS | 24VDC power supply (100/240),1.3 amps | |
| MECHANICAL ACCESSORIES | ||
| XXXMI3100MN | Stainless steel mounting nuts (2) -metric threads | |
| XXXMI3100FB | Stainless Steel Fixed Bracket | |
| XXXMI3100ADJB | Stainless Steel Adjustable Bracket | |
| XXXMI3100AP | Metric Air Purge Collar | |
| XXXMI3100RAM | Right Angle Mirror, metric thread | |
| MI3 SERIES COMMUNICATIONS BOXES | ||
| RAYMI3COMM | MI3 series IR thermometer I/O box with USB 2.0 communications. Select the type of standard sensing heads listed above. | |
| RAYMI3COMMI | MI3 series IR thermometer I/O box with USB 2.0 communications and sensing head installed. Select the type of standard sensing heads listed above and order as a separate line item. | |
| RAYMI3COMM4 | MI3 series IR thermometer I/O box with USB 2.0 and RS485communications. Select the type of standard sensing heads listed above. For use over long distance or multi-drop networks and requires use of Smart RS485 converter. | |
| RAYMI3COMMM | MI3 series IR thermometer I/O box with USB 2.0 and Modbus network communications interface. Select the type of standard sensing heads listed above. | |
| RAYMI3COMME | MI3 series IR thermometer I/O box with USB 2.0 and Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-Server server . Select the type of standard sensing heads listed above. | |
| RAYMI3COMMP2 | MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed 9 pin D-sub fieldbus connector. Select the type of standard sensing heads listed above. | |
| RAYMI3COMMP1 | MI3 series IR thermometer I/O box with USB 2.0 and Profibus network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above. | |
| RAYMI3COMMPN | MI3 series IR thermometer I/O box with USB 2.0 and Profinet network communications interface with installed M12 fieldbus connector. Select the type of standard sensing heads listed above. | |
| MI3M SERIES MULTICHANNEL DIN MOUNT COMMUNICATIONS BOXES | ||
| RAYMI3MCOMMN | Modular 3TE DIN mountable 4-channel IR thermometer system with USB 2.0 communications (no user interface or display). Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMM | Modular 4TE DIN mountable 4-channel IR thermometer system with USB 2.0 and RS485 communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMMA | Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and 4 galvanic isolated analog outputs. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMMM | Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Modbus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMME | Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Ethernet interface with built-in HTTP-Server. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMMP | Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profibus network communications. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| RAYMI3MCOMMPN | Modular 6TE DIN mountable 4-channel IR thermometer system with USB 2.0 and Profinet interface. Select the type and quantity (maximum of 4) of standard sensing heads listed above. | |
| XXXETHLTCB | 7.5m Ethernet Cable (CAT5, 70°C) with M12 plug to connect RAYMI3COMME | |
| GPS Series Sensing Heads | ||
| Raytek RAYGPSSFL Standard Focus Infrared Temperature Sensor with Laser Sighting, 50:1 Optics | ||
| Raytek RAYGPSCFL Infrared Temperature Sensor, Close Focus, 35:1 | ||
| XXXGPSCERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST, certified w/ GPC display monitor (must be ordered as a separate line item) | |
| ACCESSORIES | ||
| XXXGPSCB4 | Spare GPS Sensor Cable – 4 meter length | |
| XXXTXXACAP | Air purge collar | |
| XXXTXXACCA | Conduit adapter | |
| XXXTXXACPA | Pipe thread adaptor (Sighting Tubes listed below can be attached to this) | |
| XXXTXXACMN | Mounting nut (spare) | |
| XXXTXXACFB | Fixed bracket (spare) | |
| XXXTXXACAB | Adjustable bracket (spare) | |
| XXXTXXACSB | Swivel bracket | |
| XXXTXXACSV | Sighting viewer setup tool (for GPR & TX ) | |
| XXXTXXACRA | Right angle mirror (for targets at right angles to sensor axis) | |
| XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) | |
| XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) | |
| XXXTXXACAFA | Adjustable Furnace Wall Mounting Assembly | |
| XXXTXXACFA | Wall Mount Flange Assembly | |
| 98982-1 | Replacment Laser Switch Box For GPS Sensor | |
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | ||
| XXXTXXWR | Water flow regulator (water cooling) | |
| XXXTXXAR | Air purging flow regulator assembly with air filter | |
| XXXTXXCAFR | Cooling air flow regulator (high capacity) | |
| GPC Series Monitor | ||
| RAYGPC | GPC panel-mount meter with standard 5 VDC alarm outputs | |
| RAYGPCM | GPC panel-mount meter with 3 A mechanical alarm outputs | |
| GPC MONITOR ACCESSORIES | ||
| XXXGPSSRAC | 10 A/ 24 – 330 VAC Solid State Relay for use with 5Vdc alarm outputs from GPC monitor only | |
| XXXGPACFB | GPC mounting bracket for sub-panel mounting of monitor | |
| Raytek Marathon MM | ||
| RAYMM-LTS-CF1/SF1/SF2/SF3/VF1 | Low Temp: -40 to 800°C (-40 to 1472°F), 8 to 14 microns spectral response, 70:1 optical resolution | |
| RAYMM-MTS-CF1/SF1/SF2/SF3/VF1 | Medium Temp: 250 to 1100°C (482 to 2012°F), 3.9 micron spectral response, 70:1 optical resolution | |
| RAYMM-G5L-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 250 to 1650°C (482 to 3002°F), 5.0 micron spectral response, 70:1 optical resolution | |
| RAYMM-G5H-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 450 to 2250°C (842 to 4082°F), 5.0 micron spectral response, 70:1 optical resolution | |
| RAYMM-G7S-CF1/SF1/SF2/SF3/VF1 | Glass Surface: 300 to 900°C (572 to 1552°F), 7.9 micron spectral response, 100:1 optical resolution | |
| MM CABLE | ||
| XXX2CCB4 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 4m (13 ft.) | |
| XXX2CCB8 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 8m (26 ft.) | |
| XXX2CCB15 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) | |
| XXX2CCB30 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) | |
| XXX2CCB60 | High-temp (200°C) 12 wire 12 pin conductor cable with connector, 60m (200 ft.) | |
| XXX2CLTCB4 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 4m (13ft.) | |
| XXX2CLTCB8 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 8m (26ft.) | |
| XXX2CLTCB15 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 15m (50 ft.) | |
| XXX2CLTCB30 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 30m (100 ft.) | |
| XXX2CLTCB60 | Low-Temp (85°C) 12 wire 12 pin conductor cable with connector, 60m (200ft.) | |
| An external terminal block is included with each cable. | ||
| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
| RAYTXXTJ3 | ThermoJacket housing for TX sensors | ||
| THERMOJACKET ACCESSORIES | |||
| XXXTXXMF | Mounting Flange for ThermoJacket | ||
| XXXTXXMB | Adjustable mounting base for ThermoJacket | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) | ||
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMST | Mounting flange for use with sighting tubes | ||
| XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) | ||
| XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) | ||
| BEESIGHTT | 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | ||
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
| XXXTXXWR | Water flow regulator (water cooling) | ||
| XXXTXXAR | Air purging flow regulator assembly with air filter | ||
| XXXTXXCAFR | Cooling air flow regulator (high capacity) | ||
| THERMOJACKET & ACCESSORIES | |||
| THERMOJACKET: EXTRA RUGGED CAST METAL HOUSING FOR THERMAL, MECHANICAL, & ENVIRONMENTAL PROTECTION FOR MARATHON SENSORS, AND TX SENSORS. | |||
| RAYTXXTJ3 | ThermoJacket housing for TX sensors | ||
| RAYTXXTJ4 | ThermoJacket housing for Marathon MM Sensors | ||
| RAYTXXTJ5 | ThermoJacket housing for XR sensors | ||
| THERMOJACKET ACCESSORIES | |||
| XXXTXXMF | Mounting Flange for ThermoJacket | ||
| XXXTXXMB | Adjustable mounting base for ThermoJacket | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT model) | ||
| XXXTXXGTA | Blast Gate Assembly with Amtir Window (LT, MT, G5, P7 models) | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMST | Mounting flange for use with sighting tubes | ||
| XXXTSTC12 | 30 cm (12″) sighting tube, ceramic (up to 1500°C) | ||
| XXXTST12 | 30 cm (12″) sighting tube, stainless steel (up to 800°C) | ||
| BEESIGHTT | 30 cm (12″) sighting tube, carbon steel with 45 degree end cut and slotted weep hole at base | ||
| XXX2CFT | Focus Adjustment Tool, for use when MR1S sensors are installed in a Thermojacket. | ||
| BF2TJEXTENDER | ThermoJacket Extension flange for CCD camera accessories mounted on MR Sensor in ThermoJacket | ||
| BD3TJBACK | ThermoJacket Rear cover with Peep-sight used for sighting Marathon models without removal | ||
| XXXGTQHTW | Replacement Quartz Window for Blast Gate Assembly | ||
| JNTHDKIT | Conversion Kit to install TX into existing Thermo-Jacket | ||
| JNTORINGKIT | 5 complete O-ring sets for service of ThermoJackets | ||
| FLOW REGULATORS: FOR USE WITH COOLING/PURGING OPTIONS AND ACCESSORIES | |||
| XXXTXXWR | Water flow regulator (water cooling) | ||
| XXXTXXAR | Air purging flow regulator assembly with air filter | ||
| XXXTXXCAFR | Cooling air flow regulator (high capacity) | ||
| Raynger® 3i Plus | |||
| RAYR3IPLUS1ML | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS1MSCL | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope DS 250:1, 700°C to 3000°C (1292 to 5432°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS2ML | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUS2MSCL | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, DS 250:1, 400°C to 2000°C (752 to 3632°F), Bluetooth 4.0, USB |
||
| RAYR3IPLUSNBT1ML | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB |
||
| RAYR3IPLUSNBT1MSCL | 1 micron w/ Dual laser (EN60825 Class 2, FDA Class II) + Scope DS 250:1, 700°C to 3000°C (1292 to 5432°F), USB |
||
| RAYR3IPLUSNBT2ML | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) DS 250:1, 400°C to 2000°C (752 to 3632°F), USB |
||
| RAYR3IPLUSNBT2MSCL | 1.6 micron w/ Dual Laser (EN60825 Class 2, FDA Class II) + Scope, DS 250:1, 400°C to 2000°C (752 to 3632°F), , USB |
||
| 3IPLUS Accessories | |||
| XXXR3IPLUSCC | Carrying case | ||
| XXXR3IPLUSSTRAP | Neck strap | ||
| XXXR3IPLUSACCU | 
|
||
| XXXR3IPLUSPS | Mini USB port adaptor with multi-country power plug | ||
| (100 – 240 VAC, 50/60 Hz), including SAA, EU, UK, US and CCC | |||
| XXXR3IPLUSPSCON | Mini USB-to-DC jack converter for charging battery separately | ||
| XXXR3IPLUSUSBCB | Computer cable with USB-to-Mini USB, 1.5 m (4.9 ft) | ||
| Raytek® MP150 Linescanner | |||
| RAYTMP150-LT | 20 to 350°C (68 to 662°F), 3 to 5 µm | ||
| RAYTMP150-MT | 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTMP150-G5 | 100 to 950°C (212 to 1742°F), 5 microns | ||
| RAYTMP150-P30 | 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTMP150-P31 | 100 to 350°C (212 to 662°F), 3.43 microns | ||
| RAYTMP150-1M | 600 to 1200°C (1112 to 2192°F), 1 micron | ||
| RAYTMP150-2M | 400 to 950°C (752 to 1742°F), 1.6 micron | ||
| RAYTMP150-HR | 100 to 650°C (212 to 1202°F), 3.5 to 4 micron HR scanners are purpose built for cement scanning applications and include an internal heater and special focus distance as standard equipment. They are not equipped with a High Pressure Air Purge (HPAP). As such the only available part number is RAYTMP150HRR1. |
||
| Comunication Option R | RJ-45: Scanner data link is configured to plug into any standard RJ45 Ethernet network socket | ||
| Data Point Option (0) | Standard configuration: 512 data points per scan line (up to 80Hz), 256 data points (80 to 150Hz) | ||
| Data Point Option (1) | Enhanced configuration: 1024 data points per scan line (up to 40Hz), 512 data points per scan line (40 to 80Hz), 256 data points (80 to 150Hz) | ||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| MP150 INFRARED LINESCANNER ACCESSORIES | |||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC4 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | BOX FOR FIBER OPTIC/RJ45 CONVERTER + PS | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| XXXTMP50ACMP | Mounting Plate for setting on a Tripod | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base, includes scanner mounting plate | ||
| XXXTXXWR | Water Flow Regulator | ||
| XXXTMP50THERM | Thermostatic Control System | ||
| XXXTXXCAFR | Air Flow Regulator, high capacity, for purging window | ||
| XXXTMP50ACFG | Laser Enhancing Filter Eyeglasses for laser sighting | ||
| XXXTMP50SPSCB | Spare MP50 power cable, 180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP50SPSCB10 | Spare MP50 power cable, 180°C max. 10 meters (33 ft.) long | ||
| XXXTMP150SPETHCB | Spare MP150 Ethernet cable, 180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP150SPETHCB10 | Spare MP150 Ethernet cable, 180°C max. 10 meters (33 ft.) long | ||
| XXXTMP50S485CB | Spare MP50 RS485 Cable with RS232 converter,180°C max. 7.5 meters (25 ft.) long | ||
| XXXTMP50S485CB10 | Spare MP50 RS485 Cable with RS232 converter,180°C max. 10 meters (33 ft.) long. | ||
| XXXTMP50S4PCN | Spare MP50 4-pin connector | ||
| XXXTMP50S6PCN | Spare MP50 6-pin connector | ||
| XXXTMP50AC485CV | Spare RS485 converter for MP50 (no cable) | ||
| XXXSYS485CV | RS232/RS485 Converter (required for Output Modules). | ||
| XXXSYSPS | 24VDC power supply (100/240),1.3 amps | ||
| XXXUSB485 | USB to RS232/422/485 converter | ||
| XXXTMP150ACSWK1M | SPARE WINDOW FOR MP1501M | ||
| XXXTMP150ACSWK2M | SPARE WINDOW FOR MP1502M | ||
| XXXTMP150ACSWKG5 | SPARE WINDOW FOR MP150G5 | ||
| XXXTMP150ACSWKHR | SPARE WINDOW FOR MP150HR | ||
| XXXTMP150ACSWKLT | SPARE WINDOW FOR MP150LT | ||
| XXXTMP150ACSWKMT | SPARE WINDOW FOR MP150MT | ||
| XXXTMP150ACSWKP3 | SPARE WINDOW FOR MP150P3 | ||
| XXXTMP150FSNPT | NPT Fitting Set | ||
| XXXTMP150FSISO | ISO Fitting Set | ||
| XXXTMP150ACCC | Carrying case | ||
| High Temp Enclosure | |||
| XXXSYSENC | Enclosure & Base Stainless steel enclosure with mounting base and integrated fail-safe shutter, includes grommet plates for wiring and cooling water (if req’d) and mounting aperture for high performance vortex cooler |
||
| XXXSYSENCICP | Internal Cold-Plates Internal cold plates designed to cool scanner directly, Eliminates the need to disconnect plumbing fittings to remove scanner, supplied pre-connected with high temperature hoses – supplied as set of two. |
||
| SYSENCVT | High Performance Vortex Cooler Separates compressed air (or nitrogen) into hot and cold streams to actively cool enclosure interior |
||
| XXXSYSENCWCS | Water Cooled Shield Stainless steel high performance water shield. One inch water inlet and outlet permit high flow rates and extremely high heat removal capability. |
||
| XXXSYSENCIS | Insulating Shield A custom stainless steel envelope filled with high performacne refractory material. Placed closest to the process, it prevents heat form entering the enclosure and lessens the heat removal requirements of other elements. |
||
| TF150 Process Imaging System for Thermoforming | |||
| RAYTTF150-LT | TF150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | ||
| RAYTTF150-MT | TF150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTTF150-P30 | TF150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTTF150-31 | TF150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| OPTION FOR TF150 | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| GS150/GS150LE Process Imaging System for Glass Processing | |||
| RAYTGS150G5R1 | specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | ||
| RAYTGS150G5R0 | specifies a Glass System with a low temperature 5µm linesscanner with RJ-45 type cable and 1024 maxmum data points per scan line. | ||
| UPGRADES | |||
| RAYTGS150LEUPGRADE | The GS150LE system was developed specifically to monitor glass which has been coated on one side with a low-emissivity coating. Includes specialized MI3 sensor and GS150LE software, air-purge jacket, PC connection Kit | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| ES150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
| RAYTES150-LT | ES150 System with MP150LT 20 to 350°C (68 to 572°F), 3 to 5 microns | ||
| RAYTES150-MT | ES150 System with MP150MT, 100 to 800°C (212 to 1472°F), 3.9 microns | ||
| RAYTES150-G5 | ES150 System with MP150G5, 100 to 950°C (212 to 1742°F), 5 microns | ||
| RAYTES150-P30 | ES150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTES150-P31 | ES150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| RAYTES150-1M | ES150 System with MP1501M, 600 to 1200°C (1112 to 2192°F), 1 micron | ||
| RAYTES150-2M | ES150 System with MP1502M, 400 to 950°C (752 to 1742°F), 1.6 micron | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| EC150 Process Imaging System for Film and Flat Sheet Extrusion or Continuous Web Processes | |||
| RAYTEC150-P30-R | EC150 System with MP150P30, 30 to 250°C (86 to 482°F), 3.43 microns | ||
| RAYTEC150-P31-R | EC150 System with MP150P31, 100 to 350°C (212 to 662°F), 3.43 microns | ||
| OPTIONS | |||
| XXXTMP150CERT | Calibration is traceable to the International System of Units (SI), through National Metrological Institutes such as NIST (order as a separate line item) | ||
| XXXTMP50ACRMB | Adjustable Rugged Mounting Base (includes scanner mounting plate) | ||
| XXXHSFIC1 | High Speed Fiber-Optic/RJ45 Converter (1 Channel) | ||
| XXXHSFIC2 | High Speed Fiber-Optic/RJ45 Converter (4 Channel) | ||
| XXXHSFICBOX | Housing, Fiber optic/RJ-45 converter and power supply | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (North America Only) | ||
| CS210 Infrared Linescanning System for Rotary Kilns | |||
| RAYTCS211R1 | CS211 Rotating Kiln System (Single Scanner) Linescanner MP150HR Protective Housing XXXSYSPHSS, stainless steel Position Indicator with junction box (XXXSYSSECPI) System Connection Box (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room DataTemp CS Software Documentation |
||
| RAYTCS212R1 | CS212 Rotating Kiln System (Dual Scanner) 2 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 2 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYTCS213R1 | CS213 Rotating Kiln System (Triple Scanner) 3 Linescanners MP150HR 3 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 3 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYTCS214R1 | CS214 Rotating Kiln System (Quad Scanner) 4 Linescanners MP150HR 4 Protective Housings XXXSYSPHSS, stainless steel Position indicator with junction box (XXXSYSSECPI) 4 System Connection Boxes (field) CS210CONBOX Fibre Optic Converter Housing XXXHSFICBOX (control room) DataTemp CS Software Documentation |
||
| RAYCS210EXT | CS21x Extension KIT Maximum Extension up to a four Scanner System 1 Scanner RAYTMP150HRR1 1 Stainless Steel protective housing incl. Mounting Base XXXSYSPHSS 1 System Connection Box XXXCS210CONBOX Scanner Cable Set LT New License file (Serial number from all existing scanners needed with P.O.) |
||
| ACCESSORIES | |||
| XXXSYSCS210CON | Serial Ethernet Converter | ||
| Please note: Always necessary to connect with following components:XXXTCSLRM210, FAN Control Hardware, XXXTCS200BZ and XXXTCS200SM | |||
| XXXCS210CONBOX | CS210CONBOX,CS210 SYSTEM CONNECTION BOX | ||
| XXXCS210ENCON | Endurance Connection Box | ||
| XXXSYS16DA* | RS485 Remote Controller with 16 Digital-Outputs | ||
| XXXSYS7RA | 7-Channel Relays Output Modul | ||
| XXXTCS210BZ | Burning Zone Monitoring: Endurance Connection Box Endurance Ratio Pyrometer, 600 to 1800°C 15 m High Temperature Cable ThermoJacket Housing for E-TJ1 Blast Gate Assembly with Quartz Window 30 cm sighting tube, stainless steel Adjustable Pipe Adapter assembly Adjustable Mounting Base for Thermojacket Air Flow/Pressure Regulator Assembly |
||
| XXXTCS200SM | Shadow Monitoring: consists of MI Connection Box, MIH Sensor -40 to 600°C, 8 m high temperature cable, Air Purge Jacket, stainless steel, Adjustable Mounting Bracket. | ||
| XXXTCSLRM210 | Live Ring Migration for CS210 System, complete with LRM Remote Controller & 3 position indicators | ||
| XXXSYSLDM | Laser distance meter | ||
| XXXPi20FO1 | Fiber Optic Cable 150 m | ||
| XXXPi20FO2 | Fiber Optic Cable 300 m | ||
| SVCOSSAPKG | On-site Start-up and Commissioning Service (Item # 2509605/North America only) | ||
| XXXSYS4AA | Analog Output Module (4 channels, mA or V) | ||
| XXXSYS485CV | RS232/RS485 Converter (required for Output Modules) | ||
| CS100/200 UPGRADES to CS210 | |||
| XXXCS210BUPGRADE | Basic Upgrade to CS Software. This is not a full upgrade to the level of CS210 Not all functions of CS210 Upgrade are supported. No new wiring of system needed. |
||
| XXXCS211BUPGRADE | CS101 to CS211 (1 scanner system) Basic System Upgrade without new Scanner. This upgrades requires the use of the MP150 line scanner to utilize all funcitonality. Will work with MP50 (older generation) but not all features will be available New wiring of system needed. |
||
| XXXCS212BUPGRADE | CS102 to CS212 (2 scanner system) Basic System Upgrade without new Scanner. This upgrades requires the use of the MP150 line scanner to utilize all funcitonality. Will work with MP50 (older generation) but not all features will be available New wiring of system needed. |
||
| RAYCS211FUPGRADE | Full System Upgrade (1 scanner system) with new Scanner MP150. New wiring of system needed. Accessories analogous to a new CS211 system. |
||
| RAYCS212FUPGRADE | Full System Upgrade (2 scanner system) with new Scanner MP150. New wiring of system needed. Accessories analogous to a new CS212 system. |
||
| CS210 Infrared Linescanning System for Rotary Kilns Upgrades & Accessories | |||
| XXXTCS3D210 | 3D View Software Upgrade for existing CS210 systems | ||
| XXXTCSRFM210 | Refractory Management Software (incl. 3D Software) Upgrade for existing CS210 Systems | ||
| XXXCS210CONBOX | CS210 System Connection Box | ||
| XXXCS210ENCON | Endurance Connection Box | ||
| E1RL-F2-L-0-0 | Endurance Ratio Pyrometer, 600 to 1800°C | ||
| A-CB-HT-M16-W12-15 | 15 m High Temperature Cable, 200°C | ||
| A-TJ-EN | ThermoJacket Housing for Endurance | ||
| XXXTXXGTQ | Blast Gate Assembly with Quartz Window (HT models) | ||
| XXXTST12 | 30 cm sighting tube, stainless steel | ||
| XXXTXXAPA | Adjustable Pipe Adapter assembly | ||
| XXXTXXMB | Adjustable Mounting Base for Thermojacket | ||
| XXXTXXAR | Air Flow/Pressure Regulator Assembly | ||
| XXXSYSCS200MICON | MI Connection Box (necessary for MIH Sensor) | ||
| RAYMI310LTHCB8 | MI3 Sensor, -40 to 600°C, 8 to 14 µm, D:S 10:1, 130 ms, 8 m cable | ||
| D82MIACAJ | Air Purge Jacket, stainless steel | ||
| XXXMIACAB | Adjustable Mounting Bracket | ||
| RAYTMP150HRR1 | Kiln Scanner RAYTMP150HRR1 | ||
| XXXSYSPS1 | Industrial Power Supply Extra 240VAC/24VDC/2,5A | ||
| XXXSYSPHSS | Stainless Steel Protective Housing | ||
| XXXSYSECPI | Position Indicator | ||
| XXXSYSPHSW | Protective Window For SYSPHSS | ||
| XXXHSFIC4 | High Speed Fiber-Optic/RJ45 Converter (4 canals) | ||
| XXXSYSCONNBOXHEAT | Heater System | ||
| XXXTMP150FSNPT | NPT Fitting Set | ||
| XXXTMP150FSISO | ISO Fitting Set | ||
| XXXTCSLRMMCONNBOX | LRM Remote Control box | ||
| MP150 SYSTEM ACCESSORIES – ES150, EC150, TF150 and GS150 | |||
| RAYSYSSOFTWARE | MP150 systemsoftware DTDP | ||
| XXXSYSPS | Ind. Power Supply Standard 100VAC to 240VAC/24VDC/1.3A for DIN rail mounting | ||
| XXXSYSPS1 | Industrial Power Supply 100VAC to 240VAC/24VDC/2.5A for DIN rail mounting | ||
| XXXETHBASICKIT | Basic Kit for Output Adding | ||
| XXXETH16DI | 16-Channel Digital Input | ||
| XXXETH16DO | 16-Channel Digital Output | ||
| XXXETH2AISO | Passive Current Isolator | ||
| XXXETH2AOC0 | Analog Output Module 0-20 mA (2 each) | ||
| XXXETH2AOC4 | Analog Output Module 4-20 mA (2 each) | ||
| XXETH2AOV | Analog Voltage Output Module | ||
| XXXETH2R | Output Relay (2 each) | ||
Liên hệ & Báo giá chi tiết:
Sale ANS Vietnam:
lien.ans@ansvietnam.com
Trực tiếp Zalo: 0902937088
QUÉT NHANH MÃ QR ZALO:
=====================================================
Click xem thêm ứng dụng sản phẩm khác
Đại lý phân phối chính hãng tại Vietnam
Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7
Xem thêm sản phẩm hãng Raytek đây
Xem thêm thông tin về thương hiệu khác tại đây
Xem thêm sản phẩm khác tại đây
Đánh giá
Chưa có đánh giá nào.